What’s Included
1 × Yeson-3 Aromatherapy device
1 × glass tube
1 × Type-C charging cable
1 × stainless steel stirring needle
1 × Cleaning brush
1 × instruction manual
* First, take out the glass mouthpiece from the box, put the material into the dish of the glass mouthpiece, and insert it into the machine for preparation (recommended to insert it backwards).
* Then long press the menu key for 3 seconds to start, the machine makes a "beep" ~ sound, while the screen displays "yeson Welcome", and then enters the main heating interface.
* Next, click the menu key under the heating main interface, enter the buzzer adjustment, timer heating time adjustment, unit temperature adjustment, brightness adjustment and other modes, and click the "+" key or "-" key in each mode to adjust.
* After 2 seconds of no operation, the main interface to be heated will be displayed, the current temperature, power and start 5 minutes of timing, and no operation will be turned off within 5 minutes.
* Click the "+" key or "-" key under the heating main interface to display the currently set temperature with a beep, click the "+" key or "-" key to set the temperature will increase by 1 degree or decrease by 1 degree, long press the "+" key or "-" key then the temperature will increase or decrease by 10 degrees, the machine can set the temperature range to 50℃/122℉~220℃/428℉. Click the menu key to return to the main heating interface.
* Click the menu key to switch to the Beep ON interface, at this time you can turn on or off the key sound, click the "+" key or "-" key to display Beep ON (turn on button sound) or Beep OFF (turn off button sound).
* Click the menu key to switch to the Timer 5min interface, you can adjust the heating time, press the "+" key or "-" key to adjust between 5min~15min.
* Click the menu key to switch to the Unit ℃ interface, you can switch the temperature unit, press the "+" key or "-" key to switch between ℃ or ℉.
* Click the menu key to switch to the Bright HIGH interface, you can adjust the screen brightness, press the "+" key or "-" key to switch between low/med/high.
* Click the menu key, switch to the Power Out interface, connect other devices that need to be charged with a USB-C cable (USB-C adapter is required), and long press the "+" or "-" keys to reverse charging.
* If the battery is low, the machine will automatically shut down.
* Press and hold the menu key for 3 seconds to turn off the machine.
