* First, take out the W5 device, material cup, and battery from the box. Remove the cover of the device and unscrew the battery cover. Feed the material cup into the machine through 510 thread. Install the battery into the device and screw on the battery cover.
* Press the mechanical button 5 times to start the machine
* Manual mode: In IDLE state, long press the touch button or power button to enter the manual heating mode, the current gear breathing display, release and return to IDLE state, or after heating for a maximum of 20 seconds, automatically return to IDLE state;
* Automatic mode: In IDLE state, press the touch button or power button twice to enter the automatic heating mode. The continuous working time of the automatic mode is 10 seconds, and the current gear will be displayed continuously. After 10 seconds, it will automatically return to IDLE state.In the automatic mode, press any key to return to IDLE state.
* Clean mode: In IDLE state, press the power button or touch button for 4 times to enter the clean heating mode, the maximum duration is 30 seconds, you can press any key to return to IDLE state;
* LED indication:
3 gear temperature indicator, 1 gear 240℃, 2 gear speed 260℃, 3 gear 280℃
IDLE state: The yellow LED displays the current setting position, and the yellow light blinks.
Automatic heating mode: The yellow LED light shows the current setting, and the yellow light is on.
Manual heating mode: The yellow LED light shows the current setting position, and the yellow light flashes.
Clean heating mode: The yellow LED shows the current setting, and the yellow light is on.
* Charging instructions:
In the charging state, according to the current power level, the green LED flashes, and the green is on after the charge is full;